Show running-config telnet server – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1180
1142
Network OS Command Reference
53-1003115-01
show running-config telnet server
2
show running-config telnet server
Displays the Telnet server status in the running-config.
Synopsis
show running-config [rbridge-id {rbridge-id | all}] telnet server
Operands
rbridge-id
Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id
Specifies a unique identifier for a node.
all
Specifies all identifiers for a node.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display the current status of Telnet server in the running-config.
Usage Guidelines
Telnet server configuration is placed at the beginning of running-config and is part of the global
configuration of the switch. Telnet is enabled by default and there will be no entry in the
running-config when set to default.
Examples
Standalone mode
When Telnet service is shut down:
switch# show running-config telnet server
telnet server shutdown
VCS mode
When Telnet service is shut down:
switch# show running-config rbridge-id 3 telnet server
rbridge-id 3
telnet server shutdown
When Telnet service is enabled:
switch# show running-config [rbridge-id rbridge-id | all] telnet server
% No entries found
See Also