Brocade Network OS Command Reference v4.1.0 - Manual (Page 382)

344 Network OS Command Reference
53-1003115-01
ip as-path access-list
2
ip as-path access-list
Configures an AS-path access control list (ACL).
Synopsis ip as-path access-list string [seq seq-value] [deny regular-expression | permit regular-expression]
no ip as-path access-list string [seq seq-value] [deny regular-expression | permit
regular-expression]
Operands string ACL name.
seq-value Sequence number as defined by the seq command.
regular-expression A string inside quotes.
Defaults This option is disabled.
Command Modes RBridge ID configuration mode
Description Use this command to configure an AS-path ACL, and to specify the community name and whether
to permit or deny traffic. This command accepts a regular expression that must be enclosed in
quotes.
Usage Guidelines Use the no form of this command to restore the default.
Examples To create an AS-path ACL:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# ip as-path access-list seq 10 permit "myaspath"
See Also seq