Show clock – Brocade Network OS Command Reference v4.1.0 User Manual
Page 748
710
Network OS Command Reference
53-1003115-01
show clock
2
show clock
Returns the local time, date, and time zone.
Synopsis
show clock [rbridge-id {rbridge-id | all }]
Operands
rbridge-id rbridge-id
Specifies an RBridge ID for the switch
all
Specifies all switches in the VCS cluster.
Defaults
The local clock is used.
Command Modes
Privileged EXEC mode
Description
Use this command to display the current local clock and time zone.
If the RBridge ID is not provided, status results default to the local switch (LOCL). If rbridge-id all is
executed, the command displays the status for all switches in the VCS cluster.
Usage Guidelines
This command is currently supported only on the local RBridge.
Examples
Stand Alone mode
To show the local switch clock time:
switch# show clock
rbridge-id 1: 2012-05-04 16:01:51 Etc/GMT+0
VCS mode
To show clock time for all switches in the cluster (Logical chassis cluster mode only):
switch# show clock rbridge-id all
To show clock time for switch with rbridge-id 16:
switch# show clock rbridge-id 16
See Also