Show sfp – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1199
Network OS Command Reference
1161
53-1003115-01
show sfp
2
show sfp
Displays the SFP breakout configurations.
Synopsis
show sfp [linecard linecard [port port ]]
Operands
linecard linecard
Specifies line card information.
port port
Specifies port information.
Defaults
Displays the SFP breakout information using a line card. Port number is optional. If absent, all SFP
port configurations are shown.
Command Modes
Privileged EXEC mode
Description
Use this command to display the SFP configuration for the specified line cards. The speed column
shows the breakout speed in breakout mode, and the aggregate speed when not in breakout
mode.
Usage Guidelines
This command is supported on the line cards.
Examples
To display the SFP configuration on a line card:
switch# show sfp linecard 1
Port Type Breakout Speed
----------------------------------------------------------------------
1
SFP
n/a
10G
2
QSFP
4x10G
10G
3
SFP
n/a
40G
4
CSFP
10x10G
100G
switch# show sfp linecard 1 port 2
Port Type Breakout Speed
----------------------------------------------------------------------
2
QSFP
4X10G
10G
See Also
clear support, copy support, show support, power-off linecard, power-on linecard,
show running-config hardware connector