Brocade Network OS Command Reference v4.1.0 - Manual (Page 257)

Network OS Command Reference 219
53-1003115-01
diag clearerror
2
diag clearerror
Clears the diagnostic errors encountered during offline diagnostic tests.
Synopsis diag clearerror
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear the diagnostics failure status.
Usage Guidelines This command is valid only on fixed-configuration switches.
Examples To clear the diagnostic failure status:
switch# diag clearerror
See Also diag burninerrclear, show diag burninerrshow, show diag burninstatus