Always-compare-med (bgp) – Brocade Network OS Command Reference v4.1.0 User Manual
Page 75
Network OS Command Reference
37
53-1003115-01
always-compare-med (BGP)
2
always-compare-med (BGP)
Configures the device always to compare the Multi-Exit Discriminators (MEDs), regardless of the
autonomous system (AS) information in the paths.
Synopsis
always-compare-med
no always-compare-med
Operands
None
Defaults
This feature is disabled.
Command Modes
BGP configuration mode
Description
Use this command to configure the device to compare the Multi-Exit Discriminators (MEDs),
regardless of the AS information in the paths.
Usage Guidelines
Use the no form of this command to restore the default.
Examples
To configure the device always to compare the MEDs:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# always-compare-med
See Also
None