Brocade Network OS Command Reference v4.1.0 - Manual (Page 592)

554 Network OS Command Reference
53-1003115-01
precedence
2
precedence
Sets the precedence of the CEE map.
Synopsis precedence value
Operands value The precedence value. Valid values range from 1 through 100.
Defaults The default is 1.
Command Modes CEE map configuration mode
Description Use this command to set the precedence of the CEE map.
Usage Guidelines None
Examples To set the precedence to 1:
switch(config-cee-map-default)# precedence 1
See Also None