Brocade Network OS Command Reference v4.1.0 - Manual (Page 1176)

1138 Network OS Command Reference
53-1003115-01
show running-config switch-attributes
2
show running-config switch-attributes
Displays switch attributes.
Synopsis show running-config switch-attributes [rbridge-id] {chassis-name | host-name}
Operands chassis-name Displays the switch chassis name.
host-name Displays the switch host name.
Defaults Displays all switch attributes on the local switch.
The default host name is “sw0”.
The default chassis name depends on the switch model.
Command Modes Privileged EXEC mode
Description Use this command to display the switch attributes.
Usage Guidelines This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To display all attributes for the local switch:
switch# show running-config switch-attributes
switch-attributes 2
chassis-name VDX6720-24
host-name sw0
!
To display the host name of the local switch:
switch# show running-config switch-attributes host-name
switch-attributes 2
host-name sw0
!
See Also switch-attributes