Show fabric port-channel – Brocade Network OS Command Reference v4.1.0 User Manual
Page 804
766
Network OS Command Reference
53-1003115-01
show fabric port-channel
2
show fabric port-channel
Displays the fabric VLAG load-balance information.
Synopsis
show fabric port-channel [port-channel-id | load-balance | all ]
Operands
port-channel-id
Displays the information for the port channel ID.
load-balance
Displays the load balance information.
all
Displays all available information.
Defaults
None
Command Modes
Privileged EXEC mode
Description
This command displays the fabric’s VLAG load-balance information.
Usage Guidelines
This command displays ISL details, including the breakout index of the interface if breakout mode
is configured on the source or neighbor interface.
Examples
switch# show fabric port-channel load-balance 10
Fabric Vlag Load-Balance Information
-------------------------------
Rbridge-Id
: 2
Vlag
: 10
Load-Balance Flavor : Source and Destination MAC address and VID based load
balancing
switch# show fabric port-channel all
Fabric Vlag Load-Balance Information
-------------------------------
Rbridge-Id
: 2
Vlag
: 10
See Also