Brocade Network OS Command Reference v4.1.0 - Manual (Page 1234)

1196 Network OS Command Reference
53-1003115-01
show udld statistics
2
show udld statistics
Shows UDLD statistics.
Synopsis show udld statistics [interface {fortygigabitethernet rbridge-id/slot/port | gigabitethernet
rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}]
Operands fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface for showing statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface for showing statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface for showing statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Shows either all unidirectional link detection (UDLD) protocol statistics or shows the statistics on a
specified port.
Usage Guidelines None
Examples To show UDLD statistics on a specific 10-gigabitEthernet interface:
switch# show udld statistics interface te 5/0/1
See Also protocol udld