Brocade Network OS Command Reference v4.1.0 User Manual
Page 1054
1016
Network OS Command Reference
53-1003115-01
show running-config interface fortygigabitethernet channel-group
2
show running-config interface
fortygigabitethernet channel-group
Displays channel group configuration information for a 40-gigabit Ethernet interface participating
in link aggregation.
Synopsis
show running-config interface fortygigabitethernet [rbridge-id/slot/port] channel-group [mode |
type]
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
mode
Displays the mode of link aggregation (active, passive, or on).
type
Displays the type of link aggregation (802.3ad standards-based LAG, or
Brocade proprietary hardware-based trunking).
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about the channel group configuration of the specified
Ethernet interface.
Usage Guidelines
This command is relevant only to interfaces configured as part of a LAG.
Examples
None
See Also