Brocade Network OS Command Reference v4.1.0 - Manual (Page 1123)

Network OS Command Reference 1085
53-1003115-01
show running-config ldap-server
2
show running-config ldap-server
Displays the SSH server status in the running-config.
Synopsis show running-config ldap-server [host ipaddr | host-name]
Operands host Identifies the IPv4 address of the host.
ipaddress IPv4 address of the host.
host-name Name of the host.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the current status of the LDAP server in the running-config.
Usage Guidelines LDAP server configuration is placed at the beginning of the running-config and is part of the global
configuration of the switch. LDAP is enabled by default and no entry is shown in the running-config
when set to default.
Attributes with default values will not be displayed.
Examples Standalone mode
switch# show running-config ldap-server host 10.24.65.6
ldap-server host 10.24.65.6
port 3890
domain security.brocade.com
retries 3
!
switch#
See Also certutil import ldapca, ldap-server host, ldap-server maprole