Logging syslog-facility local – Brocade Network OS Command Reference v4.1.0 User Manual
Page 469
Network OS Command Reference
431
53-1003115-01
logging syslog-facility local
2
logging syslog-facility local
Configures the syslog facility.
Synopsis
logging syslog-facility local log_level
Operands
log_level
Specifies the syslog facility level. Valid log levels include the following:
LOG_LOCAL0, LOG_LOCAL1, LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4,
LOG_LOCAL5, LOG_LOCAL6, LOG_LOCAL7
Defaults
Syslog level is LOG_LOCAL7.
Command Modes
Global configuration mode
Description
Use this command to configure the log level for all error log entries to forward to one or more
specified servers. You can configure up to four servers.
Usage Guidelines
When used without a log level parameter, use this command to display the current value.
This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples
To configure the syslog facility level:
switch(config)# logging syslog-facility local LOG_LOCAL5
See Also
logging syslog-server, show running-config logging syslog-server