Brocade Network OS Command Reference v4.1.0 - Manual (Page 174)

136 Network OS Command Reference
53-1003115-01
clear nas statistics
2
clear nas statistics
Clears automatic network attached storage (NAS) statistics.
Synopsis clear nas statistics all | server-ip ip_addr mask [vlan vlan_id | vrf VRF_name] [rbridge-id
rbridge-id]
Operands all Shows all gathered statistics.
server-ip IP address for which to clear Auto-NAS statistics for.
ip_addr mask IPv4 address of a specified Auto-NAS port in dotted-decimal notation with a
CIDR notation mask.
vlan VLAN_id Specifies a VLAN interface for which to clear the statistics.
vrf VRF_name Specifies an OSPF VRF interfacefor which to clear the statistics.
[rbridge-id rbridge-id] Specifies an RBridge ID for which to clear the statistics.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear the specified Auto-NAS statistics.
Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T
switches.
Examples None
See Also auto-qos enable, nas auto-qos, nasport server-ip, show nas statistics,
show running-config nas server-ip, show system internal nas, show cee maps