Brocade Network OS Command Reference v4.1.0 - Manual (Page 1343)

Network OS Command Reference 1305
53-1003115-01
tagged-ieee-bpdu-enabled
2
tagged-ieee-bpdu-enabled
Activates IEEE BPDU packets.
Synopsis tagged-ieee-bpdu-enabled
no tagged-ieee-bpdu-enabled
Operands None
Defaults None
Command Modes mode
Description Use this command to activate IEEE BPDU packets.
ATTENTION
This command should be enabled when the interface is connected to a switch which sends tagged
IEEE bpdu packets.
Usage Guidelines Enter no tagged-ieee-bpdu-enabled to disable this feature.
This command should only be used on edge ports.
Examples None
See Also None