Brocade Network OS Command Reference v4.1.0 - Manual (Page 1058)

1020 Network OS Command Reference
53-1003115-01
show running-config interface fortygigabitethernet fabric
2
show running-config interface fortygigabitethernet fabric
Displays fabric protocol configuration parameters for a 40-gigabit Ethernet interface.
Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] fabric [isl [enable] |
trunk [enable]]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
isl [enable] Indicates only the administration and operational state the Inter-Switch
Link (ISL).
trunk [enable] Indicates only whether trunking is enabled on the port.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display ISL and trunking status for the specified interface.
Usage Guidelines None
Examples
switch# show running-config interface fortygigabitethernet 1/0/49 fabric
interface fortygigabitethernet 1/0/49
fabric isl enable
fabric trunk enable
See Also fabric isl enable, fabric trunk enable