Brocade Network OS Command Reference v4.1.0 - Manual (Page 176)

138 Network OS Command Reference
53-1003115-01
clear sessions
2
clear sessions
To log out the user sessions connected to the switch.
Synopsis clear sessions [rbridge-id rbridge-id | all]
Operands rbridge-id Enables RBridge ID mode to support VCS on individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Privileged EXEC
Description Logs out the user sessions connected to the switch.
Usage Guidelines This command is not distributed across the cluster. The RBridge ID of the node should be used to
log out users connected to the individual nodes.
The rbridge-id operand is supported in VCS mode only.
Examples Standalone mode
switch# clear sessions
This operation will logout all the user sessions. Do you want to continue
(yes/no)?: y
VCS mode
switch# clear sessions rbridge-id 3
This operation will logout all the user sessions. Do you want to continue
(yes/no)?: y
See Also None