Brocade Network OS Command Reference v4.1.0 - Manual (Page 55)

Network OS Command Reference 17
53-1003115-01
access-group
2
access-group
Applies or removes an ACL from an interface.
Synopsis {ip | ipv6 | mac} access-group NAME {in | out}
no {ip | ipv6 | mac} access-group NAME {in | out}
Operands ip | ipv6 | mac Specifies the Layer 2 or Layer 3 ACL to bind to an interface.
in | out Specifies the ACL binding direction (ingress or egress).
access group NAME Specifies the name assigned to the access group.
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to apply an ACL to an interface.
Usage Guidelines Use the no form of this command to remove an ACL from an interface.
Examples None
See Also None