Match – Brocade Network OS Command Reference v4.1.0 User Manual
Page 491
Network OS Command Reference
453
53-1003115-01
match
2
match
Creates a classification map or “class-map” to classify traffic based on configured match criteria.
Synopsis
match criteria
Operands
criteria
Used while in config-classmap mode to configure the match criteria for the
class.
Defaults
The only available match criteria at this time is “match any.”
Command Modes
Class-map configuration mode
Description
Use this command to classify traffic based on match criteria. When you launch the class-map
command, the system is placed in config-classmap mode for the configured map. At this point, you
can provide match criteria for the class. The only available match criteria at this time is
“match any.”
Usage Guidelines
This command is only supported on Brocade VDX 8770-4, VDX 8770-8, and later switches.
Examples
To configure “match any” match criteria for the class while in config-classmap mode:
switch(config-classmap)# match any
See Also