Brocade Network OS Command Reference v4.1.0 User Manual
Page 161
Network OS Command Reference
123
53-1003115-01
clear ip ospf
2
A.B.C.D
Specifies the IP address of the neighbor to clear.
all
Clears all neighbors.
routes
Clears matching routes or clears all routes.
A.B.C.D
Clears all routes that match the prefix and mask that you specify.
all
Clears all routes.
Defaults
None
Command Modes
Privileged EXEC mode
Usage Guidelines
If the physical interface type and name are specified, the rbridge-id rbridge-id option is not
available.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
•
On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
•
On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples
To restart the OSPF processes:
switch# clear ip ospf all
See Also
None