Brocade Network OS Command Reference v4.1.0 - Manual (Page 1184)

1146 Network OS Command Reference
53-1003115-01
show running-config threshold-monitor sfp
2
show running-config threshold-monitor sfp
Displays the system’s running SFP configuration.
Synopsis show running-config threshold-monitor sfp
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the running system’s SFP threshold configuration.
Usage Guidelines Default values are not displayed under the show running-config threshold-monitor sfp command.
Only custom values are displayed.
Examples
switch# do show running-config threshold-monitor sfp
threshold-monitor sfp pause
threshold-monitor sfp apply custom
threshold-monitor sfp policy custom Type 1GSR area TXP threshold high-threshold
2000 low-threshold 1000 buffer 500
threshold-monitor sfp policy custom Type 1GSR area TXP alert above
highthresh-action raslog lowthresh-action none
threshold-monitor sfp policy custom Type 1GSR area TXP alert below
highthresh-action none lowthresh-action raslog
See Also show system monitor