Brocade Network OS Command Reference v4.1.0 - Manual (Page 487)

Network OS Command Reference 449
53-1003115-01
map
2
map
Enables map configuration mode.
Synopsis map {default}
Operands default This keyword is required.
Defaults None
Command Modes FCoE configuration mode
Description Use this command to configure the FCoE map.
Usage Guidelines You must be in the feature configuration mode for FCoE for this command to function.
Examples
switch(config)# fcoe
switch(config-fcoe)# map default
switch(config-fcoe-map-default)#
See Also fcoe