Brocade Network OS Command Reference v4.1.0 - Manual (Page 244)

206 Network OS Command Reference
53-1003115-01
default-metric (OSPF)
2
default-metric (OSPF)
Sets the default metric value for the OSPF routing protocol.
Synopsis default-metric metric
no default-metric
Operands metric OSPF routing protocol metric value.
Defaults The default metric value for the OSPF routing protocol is 10.
Command Modes OSPF VRF router configuration mode
Description Use this command to specify a default metric which will overwrite any incompatible metrics that
may exist when OSPF redistributes routes. Therefore, setting the default metric ensures that
neighbors will use correct cost and router computation.
Usage Guidelines Enter no default-metric to return to the default setting.
Examples To set the default metric to 20:
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router ospf
switch(config-router-ospf-vrf-default-vrf)# default-metric 20
See Also default-information-originate (OSPF)