Brocade Network OS Command Reference v4.1.0 - Manual (Page 390)

352 Network OS Command Reference
53-1003115-01
ip http-server enable
2
ip http-server enable
Enables the HTTP server.
Synopsis ip http-server enable
no ip http-server enable
Operands None
Defaults The HTTP server is disabled by default.
Command Modes Global configuration mode
Description Use this command to enable the HTTP server. Once enabled, the HTTP daemon starts without the
need to reboot.
Usage Guidelines Use the no ip http-server enable command to disable the HTTP server. All active HTTP connections
are closed, followed by a restart of the Apache server.
Examples None
See Also None