Show edge-loop-detection globals, Show edge-loop-detection globals, sho, Show edge-loop-detection globals, shutdo – Brocade Network OS Command Reference v4.1.0 User Manual
Page 784: W edge-loop-detection globals
746
Network OS Command Reference
53-1003115-01
show edge-loop-detection globals
2
show edge-loop-detection globals
Displays ELD global configuration values for status, disabled ports, and resource.
Synopsis
show edge-loop-detection globals
Operands
None
Defaults
None
Command Modes
Privileged EXEC mode
ELD configuration mode
Description
Use this command to view the configured values for PDU receive limit, shutdown time, and hello
time.
Usage Guidelines
This functionality detects Layer 2 loops only.
Examples
To view the ELD global configuration values:
switch# show edge-loop-detection globals
Edge-loop-detection global configuration values are as below:
PDU receive limit (packets):
1
Shutdown-time (minutes):
0
Hello-time (msec):
1000
See Also
edge-loop-detection vlan, hello-interval, pdu-rx-limit, protocol edge-loop-detection, shutdown-time