Brocade Network OS Command Reference v4.1.0 - Manual (Page 253)

Network OS Command Reference 215
53-1003115-01
description (VRRP)
2
description (VRRP)
Describes a VRRP-E interface.
Synopsis description description
no description
Operands description Characters describing the VRRP-E interface. The string must be between 1
and 64 ASCII characters in length.
Defaults None
Command Modes Virtual-router-group configuration mode
Description Use this command to describe a VRRP-E interface.
Usage Guidelines Enter no description to remove the description.
Examples To describe VRRP-E group 10 interface:
switch(config)# rbridge-id 101
switch(config-rbridge-id-101)# int ve 25
switch(config-ve-25)# vrrp-extended-group 10
switch(config-vrrp-extended-group-10)# description vrrpe_group_10
See Also vrrp-group, vrrp-extended-group