Brocade Network OS Command Reference v4.1.0 - Manual (Page 1306)

1268 Network OS Command Reference
53-1003115-01
support autoupload-param
2
support autoupload-param
Defines autoupload parameters.
Synopsis support autoupload-param hostip host-ip user user_acct password password protocol [ftp | scp |
sftp] directory path
Operands hostip host-ip Specifies the IP address of the remote host.
user user_acct Specifies the user name to access the remote host.
password password Specifies the password to access the remote host.
protocol FTP | SCP | SFTP
Specifies the protocol used to access the remote server.
directory path Specifies the path to the directory.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Global configuration mode
Description Use this command to define autoupload parameters.
Usage Guidelines None
Examples To configure autoupload parameters:
switch(config)# support autoupload-paramhostip 10.31.2.27 protocol [ftp|scp |
sftp]username hegdes directory /uers/home40/hegdes/autoupload password
(<string>): *****
See Also None