Brocade Network OS Command Reference v4.1.0 - Manual (Page 1241)

Network OS Command Reference 1203
53-1003115-01
show virtual-fabric status
2
show virtual-fabric status
Displays the status of the Virtual Fabric (VF): VF-capable, VF-incapable, or VF-enabled.
Synopsis show virtual-fabric status
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the status of the VF with respect to all nodes in the fabric. The
possible states are as follows:
• VF-capable: All nodes in the fabric can support service or transport VFs.
• VF-incapable: At least one node in the fabric cannot support service or transport VFs.
• VF-enabled: The Virtual Fabric is already enabled and service or transport VFs are supported
Usage Guidelines None
Examples Typical command output display.
switch# show virtual-fabric status
Fabric is virtual-fabric incapable
Rbridge-Id Virtual-fabric status
=================================
1 capable
2 capable
3 incapable
4 capable
See Also None