Neighbor advertisement-interval (bgp) – Brocade Network OS Command Reference v4.1.0 User Manual
Page 530
492
Network OS Command Reference
53-1003115-01
neighbor advertisement-interval (BGP)
2
neighbor advertisement-interval (BGP)
Enables changes to interval over which a specified neighbor or peer-group holds route updates
before forwarding them.
Synopsis
neighbor {ip-address | peer-group-name} advertisement-interval seconds
no neighbor
Operands
ip-address
IPv4 address of the neighbor
peer-group-name
Peer group name configured by the neighbor peer-group-name command.
seconds
Range is from 0 through 3600.
Defaults
The default is 0.
Command Modes
BGP configuration mode
Description
Use this command to configure the interval, in seconds, over which a specified neighbor or peer
group holds all route updates before forwarding them. When the timer expires, the routes are sent
as a batch.
Usage Guidelines
None
Use the no form of this command to reset the interval to the default.
Examples
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# neighbor 10.11.12.13 advertisement-interval 60
See Also
None