Brocade Network OS Command Reference v4.1.0 - Manual (Page 913)

Network OS Command Reference 875
53-1003115-01
show ip ospf config
2
show ip ospf config
Displays OSPF configuration.
Synopsis show ip ospf config [[vrf vrfname [rbridge-id {rbridge-id | all }]] | rbridge-id {rbridge-id | all }]
Operands vrf vrfname Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.
all Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the OSPF configuration.
Usage Guidelines None
Examples
switch# show ip ospf config
Router OSPF: Enabled
Redistribution: Disabled
Default OSPF Metric: 10
OSPF Auto-cost Reference Bandwidth: Disabled
OSPF Redistribution Metric: Type2
OSPF External LSA Limit: 14913080
OSPF Database Overflow Interval: 0
RFC 1583 Compatibility: Enabled
Router id: 0.0.0.0
OSPF Area currently defined:
Area-ID Area-Type Cost
0 normal 0
1 normal 0
OSPF Area Range currently defined:
Area-ID Range-Address Subnetmask Status Config-Cost
1 20.0.0.0 255.0.0.0 advertise 100
1 30.0.0.0 255.0.0.0 not-advertise -
See Also None