Brocade Network OS Command Reference v4.1.0 User Manual
Page 906
868
Network OS Command Reference
53-1003115-01
show ip interface
2
Ten Gigabit Ethernet 1/0/9
unassigned
up
up
Ten Gigabit Ethernet 1/0/10 unassigned
up
down
Ten Gigabit Ethernet 1/0/11 unassigned
up
down
Ten Gigabit Ethernet 1/0/12 unassigned
up
up
Ten Gigabit Ethernet 1/0/13 unassigned
up
up
Ten Gigabit Ethernet 1/0/14 unassigned
up
down
Ten Gigabit Ethernet 1/0/15 unassigned
up
up
Ten Gigabit Ethernet 1/0/16 unassigned
up
down
Ten Gigabit Ethernet 1/0/17 unassigned
up
up
Ten Gigabit Ethernet 1/0/18 unassigned
up
down
Ten Gigabit Ethernet 1/0/19 unassigned
up
up
Ten Gigabit Ethernet 1/0/20 unassigned
up
up
Ten Gigabit Ethernet 1/0/21 unassigned
up
up
Ten Gigabit Ethernet 1/0/22 unassigned
up
up
Ten Gigabit Ethernet 1/0/23 unassigned
up
up
Vlan 1
unassigned
administratively down
down
Vlan 100
unassigned
administratively down
down
Vlan 200
unassigned
administratively down
down
To display port-security status when the port-security feature is applied:
sw0# show ip interface brief
Interface IP-Address Status Protocol
=======================================================================
Port-channel 1 unassigned up up
TenGigabitEthernet 0/1 unassigned up up
TenGigabitEthernet 0/2 unassigned admin-down down "Port security violation"
TenGigabitEthernet 0/3 unassigned admin-down down
TenGigabitEthernet 0/4 unassigned admin-down down "Port security violation"
To display the IP interface status of a 1-gigabit Ethernet port on a Brocade VDX 6710 switch:
switch# show ip interface gigabitethernet 1/0/1
Gigabit Ethernet 1/0/1 is up protocol is up
IP unassigned
Proxy Arp is not Enabled
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
See Also