Brocade Network OS Command Reference v4.1.0 - Manual (Page 276)

238 Network OS Command Reference
53-1003115-01
dot1x reauthenticate interface
2
dot1x reauthenticate interface
Initiates 802.1X reauthentication on a specified interface.
Synopsis dot1x reauthenticate interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to initiate 802.1X reauthentication on a specified interface.
Usage Guidelines None
Examples To initiate reauthentication on 10-gigabit Ethernet interface 0/16:
switch# dot1x reauthenticate interface tengigabitethernet 0/16
See Also None