Dot1x reauthentication, T1x reauthentication, T1x reauthentication, do – Brocade Network OS Command Reference v4.1.0 User Manual
Page 277: Dot1x reauthentication, do
Network OS Command Reference
239
53-1003115-01
dot1x reauthentication
2
dot1x reauthentication
Enables 802.1X port reauthentication.
Synopsis
dot1x reauthentication
no dot1x reauthentication
Operands
None
Defaults
Reauthentication is disabled.
Command Modes
Interface subtype configuration mode
Description
Use this command to enable 802.1X reauthentication on a port.
Usage Guidelines
Enter no dot1x reauthentication to return to the default setting.
Examples
To enable 802.1X reauthentication on a specific 10-gigabit Ethernet interface port:
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# dot1x reauthentication
To disable 802.1X reauthentication on a specific 1-gigabit Ethernet interface port:
switch(config)# interface gigabitethernet 178/2/9
switch(conf-if-gi-178/2/9)# no dot1x reauthentication
See Also
interface, dot1x authentication, dot1x port-control, dot1x quiet-period, dot1x reauthMax,
dot1x timeout re-authperiod, dot1x timeout server-timeout, dot1x timeout supp-timeout,
dot1x timeout tx-period