Brocade Network OS Command Reference v4.1.0 - Manual (Page 869)

Network OS Command Reference 831
53-1003115-01
show ip bgp filtered-routes
2
show ip bgp filtered-routes
Displays BGP4 filtered routes that are received from a neighbor or peer group.
Synopsis show ip bgp filtered-routes {detail} [ip-addr {/mask} [longer-prefixes]] | as-path-access-list name] |
prefix-list name] [rbridge-id rbridge-id]
Operands detail Optionally displays detailed route information.
ip-addr IPv4 address of the destination network in dotted-decimal notation.
mask (Optional) IPv4 mask of the destination network in CIDR notation.
longer-prefixes Specifies all statistics for routes that match the specified route, or that
have a longer prefix than the specified route.
as-path-access-list Specifies an AS-path ACL.
prefix-list Specifies an IP prefix list.
name Name of an AS-path ACL or prefix list.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 filtered routes that are received from a neighbor or peer group.
Usage Guidelines None
Examples
switch# show ip bgp filtered-routes detail 10.11.12.13 prefix-list
See Also None