Brocade Network OS Command Reference v4.1.0 - Manual (Page 1229)

Network OS Command Reference 1191
53-1003115-01
show telnet server status
2
show telnet server status
Displays the current Telnet server status.
Synopsis show telnet server status [rbridge-id {rbridge-id | all}]
Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the current status of Telnet server.
Usage Guidelines None
Examples When Telnet server status is enabled:
switch# show telnet server status
Telnet server status: Enabled
When Telnet server status is disabled:
sw0# show telnet server status
Telnet server status: Disabled
If you are in VCS mode
When Telnet server status is enabled:
switch# show telnet server status [rbridge-id rbridge-id | all]
Telnet server status: Enabled
When Telnet server is disabled in rbridge-id 3:
switch# show telnet server status rbridge-id 3
rbridge-id 3 Telnet server status: Disabled
switch#
See Also telnet server shutdown, show running-config telnet server