Address-family ipv4 unicast (vrf) – Brocade Network OS Command Reference v4.1.0 User Manual

Page 58

Advertising
background image

20

Network OS Command Reference

53-1003115-01

address-family ipv4 unicast (VRF)

2

address-family ipv4 unicast (VRF)

Enables IPv4 address-family support for VRF routing.

Synopsis

address-family {ipv4} {unicast}

no address-family {ipv4} {unicast}

Operands

None

Defaults

None

Command Modes

VRF configuration mode

Description

Use this command to enter IPv4 address-family configuration mode to configure a variety of VRF
unicast routing options.

Usage Guidelines

Use the no form of this command to remove IPv4 address-family configurations from the device.

Examples

To enable BGP IPv4 address-family configuration mode:

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# vrf orange

switch(config-vrf-orange)# address-family ipv4 unicast

switch(config-ipv4u)#

See Also

None

Advertising