Brocade Network OS Command Reference v4.1.0 - Manual (Page 1050)

1012 Network OS Command Reference
53-1003115-01
show running-config interface FibreChannel
2
Enter interface FibreChannel to set the values.
Examples To display Fibre Channel port attributes for all ports on a Brocade VDX 6730 switch:
switch# show running-config interface FibreChannel
interface FibreChannel 3/0/1
desire-distance 0
no isl-r_rdy
trunk-enable
no shutdown
!
interface FibreChannel 3/0/2
desire-distance 0
no isl-r_rdy
trunk-enable
no shutdown
!
interface FibreChannel 3/0/3
desire-distance 0
no isl-r_rdy
trunk-enable
no shutdown
!
(output truncated)
To display Fibre Channel port attributes for one port of a Brocade VDX 6730 switch:
switch# show running-config interface FibreChannel 8/0/1
interface FibreChannel 8/0/1
speed 8gbps
long-distance ld
vc-link-init arb
desire-distance 0
no isl-r_rdy
trunk-enable
shutdown
!
To display the setting of a specific attribute on a specific port:
switch# show running-config interface FibreChannel 66/0/1 speed
interface FibreChannel 66/0/1
speed auto
!
See Also desire-distance, fill-word, interface, isl-r_rdy, long-distance, shutdown, speed (Fibre Channel),
trunk-enable, vc-link-init