Brocade Network OS Command Reference v4.1.0 User Manual
Page 1097
Network OS Command Reference
1059
53-1003115-01
show running-config interface tengigabitethernet channel-group
2
show running-config interface
tengigabitethernet channel-group
Displays channel group configuration information for a 10-gigabit Ethernet interface participating
in link aggregation.
Synopsis
show running-config interface tengigabitethernet [rbridge-id/slot/port] channel-group [mode |
type]
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
mode
Displays the mode of link aggregation (active, passive, or on).
type
Displays the type of link aggregation (802.3ad standards-based LAG, or
Brocade proprietary hardware-based trunking).
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about the channel group configuration of the specified
10-gigabit Ethernet interface.
Usage Guidelines
This command is relevant only to interfaces configured as part of a LAG.
Examples
None
See Also