Nport – Brocade Network OS Command Reference v4.1.0 User Manual
Page 560
522
Network OS Command Reference
53-1003115-01
nport
2
nport
Enables N_Port configuration mode for a specific N_Port ID for Access Gateway mode.
Synopsis
nport port
no nport port
Operands
port
N_Port number supported by hardware platform.
Defaults
None
Command Modes
Access Gateway (AG) configuration
Description
This command enables N_Port configuration mode for a specific N_Port number so that you can
map VF_Ports to the N_Port (Port Mapping).
Usage Guidelines
To use this command, you must be in Access Gateway (AG) configuration mode, This command
enables N_Port configuration mode for the specific N_Port. While in this mode, you can map
VF_Ports to the N_Port. Enter the N_Port in RBridge ID/port group ID/N_Port ID format, such as
3/0/4 for Rbridge 3, port group 0 (default port group), and N_Port 4.
Examples
Enabling N_Port configuration mode for N_Port 4 while in AG configuration mode.
sw0(config-rbridge-id-2-ag)# nport 2/0/4
sw0(config-rbridge-id-2-ag-nport-if-fi-2/0/4)#
See Also