Brocade Network OS Command Reference v4.1.0 User Manual
Page 1084
1046
Network OS Command Reference
53-1003115-01
show running-config interface gigabitethernet priority-tag
2
show running-config interface gigabitethernet priority-tag
Displays whether 802.1p priority tagging is configured for a 1-gigabit Ethernet interface.
Synopsis
show running-config interface gigabitethernet [rbridge-id/slot/port] priority-tag
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
Defaults
None
Description
Use this command to display whether AMPP port-profiling is configured for the specified interface.
Command Modes
Privileged EXEC mode
Usage Guidelines
This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples
switch# show running-config interface gigabitethernet 1/0/8 priority-tag
interface Gigabit Ethernet 1/0/8
priority-tag
See Also