Dscp-mutation – Brocade Network OS Command Reference v4.1.0 User Manual
Page 287
Network OS Command Reference
249
53-1003115-01
dscp-mutation
2
dscp-mutation
Specifies the dscp-mutation mutation-map to be used on the port.
Synopsis
dscp-mutation map_name
Operands
map_name
The user-defined map-name.
Defaults
None
Command Modes
Policy-map configuration mode-
Description
Use this command to specify the dscp-mutation mutation-map to be used on the port.
Usage Guidelines
This command is allowed only for the ingress direction.
This command can only be configured in for the class class-default command.
This command can lead to a possible contradiction if there are other user-defined classes used in
the same policy-map which has a set cos action configured. In this case-defined cos takes priority
over the mutation map.
Examples
Typical command example:
switch(config)#policy-map mutation
switch(config-policymap)#class class-default
switch(config-policyclass)# dscp-mutation plsmap
See Also