Snmp-server location, Nmp-server location, Mp-server location, snm – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1267: Ver location, Snmp-server location, snmp-ser, Snmp-server location, sn, Ver location, snm
Network OS Command Reference
1229
53-1003115-01
snmp-server location
2
snmp-server location
Sets the SNMP server location string.
Synopsis
snmp-server location string
no snmp-server location string
Operands
string
Specifies the SNMP server location string. You must enclose the text in
double quotes if the text contains spaces.
Defaults
The location string is “End User Premise.”
Command Modes
Global configuration mode
Description
Use this command to set the SNMP server location string.
Usage Guidelines
None
Examples
To set the SNMP server location string to “Building 3 Room 214”:
switch(config)# snmp-server location “Building 3 Room 214”
To set the SNMP server location to the default, “End User Premise”:
switch(config)# no snmp-server location
See Also
show running-config snmp-server, snmp-server community, snmp-server contact,
snmp-server user, snmp-server v3host