Brocade Network OS Command Reference v4.1.0 - Manual (Page 206)

168 Network OS Command Reference
53-1003115-01
cos-traffic-class
2
cos-traffic-class
Specifies the CoStraffic class mutation map to be used on the port.
Synopsis cos-traffic-class map_name
Operands map_name The user-defined map name.
Defaults None
Command Modes Policy-map configuration mode
Description Use this command to specify the CoStraffic class mutation map to be used on the port.
Usage Guidelines This command is allowed only for the Ingress direction.
This command can only be configured for the class class-default command.
This command can lead to a possible contradiction if there are other user-defined classes used in
the same policy-map which has a set CoS action configured. In this case, the defined CoS takes
priority over the mutation map.
Examples Typical command example:
switch(config)#policy-map mutation
switch(config-policymap)#class class-default
switch(config-policyclass)# cos-mutation cos-traffic-class dscp-mutation dscp-cos
dscp-traffic-class plsmap
See Also class, policy-map