Brocade Network OS Command Reference v4.1.0 - Manual (Page 1101)

Network OS Command Reference 1063
53-1003115-01
show running-config interface tengigabitethernet fabric
2
show running-config interface tengigabitethernet fabric
Displays fabric protocol configuration parameters for a 10-gigabit Ethernet interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] fabric [isl [enable] |
trunk [enable]]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
isl [enable] Indicates only the administration and operational state of the Inter-Switch
Link (ISL).
trunk [enable] Indicates only whether trunking is enabled on the port.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display ISL and trunking status for the specified 10-gigabit Ethernet
interface.
Usage Guidelines None
Examples
switch# show running-config interface tengigabitethernet 1/0/49 fabric
interface tengigabitethernet 1/0/49
fabric isl enable
fabric trunk enable
See Also fabric isl enable, fabric trunk enable