Show cee maps, W cee maps – Brocade Network OS Command Reference v4.1.0 User Manual
Page 736
698
Network OS Command Reference
53-1003115-01
show cee maps
2
show cee maps
Displays information on the defined CEE maps.
Synopsis
show cee maps default
Operands
None
Defaults
The only map name allowed is “default.”
Command Modes
Privileged EXEC mode
Description
Use this command to display information on the CEE map. The configuration state is displayed
with a list of all of the Layer 2 interfaces bound to the CEE map.
Usage Guidelines
Network OS v4.1.0 only allows the CEE map named “default.”
Examples
To view the CEE map:
switch0# show cee maps
CEE Map 'default'
Precedence: 1
Remap Fabric-Priority to Priority 0
Remap Lossless-Priority to Priority 0
Priority Group Table
1:
Weight 40, PFC Enabled, BW% 40
2:
Weight 40, PFC Disabled, BW% 40
3:
Weight 20, PFC Disabled, BW% 20
15.0: PFC Disabled
15.1: PFC Disabled
15.2: PFC Disabled
15.3: PFC Disabled
15.4: PFC Disabled
15.5: PFC Disabled
15.6: PFC Disabled
15.7: PFC Disabled
Priority Table
CoS:
0
1
2
3
4
5
6
7
----------------------------------------
PGID:
2
2
3
1
2
2
2 15.0
See Also