Telnet server shutdown, Elnet server shutdown – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1346
1308
Network OS Command Reference
53-1003115-01
telnet server shutdown
2
telnet server shutdown
Disables Telnet service on the switch.
Synopsis
telnet server shutdown
no telnet server shutdown
Operands
None
Defaults
None
Command Modes
Global configuration mode
RBridge ID configuration mode
Description
Use this command to disable Telnet service on the switch.
Usage Guidelines
Enter no telnet server shutdown to enable Telnet service. This command is not distributed across
a cluster. The RBridge ID of the node should be used to configure service on individual nodes.
Examples
Standalone mode
To enable Telnet service on a switch:
switch(config)# no telnet server shutdown
To shut down Telnet service on a switch:
switch(config)# telnet server shutdown
VCS mode
To shut down Telnet service on a switch:
switch(config)# rbridge-id 3
switch(config-rbridge-id-3)# telnet server shutdown
To enable Telnet service on a switch:
switch(config)# rbridge-id 3
switch(config-rbridge-id-3)# no telnet server shutdown
See Also
show running-config telnet server, show telnet server status