Show storm-control – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1223

Advertising
background image

Network OS Command Reference

1185

53-1003115-01

show storm-control

2

show storm-control

Displays information for traffic controlled by configured rate limits.

Synopsis

show storm-control

show storm-control broadcast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]

show storm-control multicast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]

show storm-control interface {fortygigabitethernet | gigabitethernet | tengigabitethernet}
rbridge-id/slot/port

show storm-control unknown-unicast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]

Operands

show storm-control

Displays all BUM (Broadcast, Unknown unicast and Multicast)-related
configurations in the system.

show storm-control broadcast

Displays all BUM-related configurations in the system for the broadcast
traffic type.

show storm-control multicast

Displays all BUM-related configurations in the system for the multicast
traffic type.

show storm-control interface type rbridge-id/slot/port

Displays all BUM-related configurations in the system for the specified
interface. You must specify an interface type, followed by the
rbridge-id/slot/port.

show storm-control unknown-unicast

Displays all BUM-related configurations in the system for the
unknown-unicast traffic type.

interface type rbridge-id/slot/port

Specifies an interface type, followed by the rbridge-id/slot/port, for which to
display all BUM-related configurations in the system for the specified traffic
type. Use this parameter to display information on a per-port basis.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display BUM storm-control-related configuration for the entire system, for
specified traffic types, for specified interfaces, or for specified traffic types on specified interfaces.

Usage Guidelines

None

Examples

To display storm-control information for broadcast traffic on the 10-gigabit Ethernet interface
102/4/1:

switch# show storm-control broadcast interface tengigabitethernet 102/4/1

Interface

Type

rate (Mbps)

conformed

violated

total

Te102/4/1

broadcast

100,000

12500000000

12500000000

25000000000

Advertising