Brocade Network OS Command Reference v4.1.0 - Manual (Page 1366)

1328 Network OS Command Reference
53-1003115-01
transport-service
2
transport-service
In a Virtual Fabrics context, associates a service VF with a trunk port interface as a transport VF.
Synopsis transport-service tlsid
no transport-service tlsid
Operands tlsid The transport LAN service ID. Range is from 1 through 1000.
Defaults This feature is disabled by default.
Command Modes VLAN configuration mode
Description In a Virtual Fabrics context, use this command to associate a service VF (VLAN ID > 4095, through
8191) to a trunk port interface as a transport VF.
Usage Guidelines This command does not apply to standard (802.1Q) VLANs (VLAN IDs from 1 through 4095).
This command is not supported when issued from a secondary node.
Enter no transport-service tlsid to remove the service VF from the trunk port interface as a
transport VF.
Examples Configure a classified VLAN and assign it to transport VF instance 10:
switch(config)# interface vlan 5000
switch(config-vlan-5000)# transport-service 10
See Also interface vlan, vcs virtual-fabric enable