Brocade Network OS Command Reference v4.1.0 - Manual (Page 1128)

1090 Network OS Command Reference
53-1003115-01
show running-config logging syslog-facility
2
show running-config logging syslog-facility
Displays the syslog facility log level.
Synopsis show running-config logging syslog-facility [local]
Operands local Displays the local syslog facility level.
Defaults Displays the local configuration.
Command Modes Privileged EXEC mode
Description Use this command to display the local syslog facility log level.
Usage Guidelines This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To display the syslog daemon IP addresses configured on a switch:
switch# show running-config logging syslog-facility
logging syslog-facility local LOG_LOCAL7
See Also logging syslog-server, show running-config logging syslog-server