Lenze EVF9383 - Manual (Page 100)

Control terminals
Important notes 5.6
5.6.1
l
5.6−2 EDSVF9383V EN 7.1−04/2012
(
Stop!
ƒ Connect or disconnect the terminal strips only if the controller
is disconnected from the mains!
ƒ Wire the terminal strips before connecting them!
ƒ Unused terminal strips must also be plugged on to protect the
contacts.
Cable type Wire end ferrule Maximum cable
cross−section Tightening
torque Stripping
length
Rigid — 2.5 mm 2 (AWG 14)
0.5 ... 0.6 Nm
(4.4 ... 5.3 lb−in)
5 mm
Flexible
Without wire end
ferrule
2.5 mm 2 (AWG 14)
Flexible
Wire end ferrule
without plastic
sleeve
2.5 mm 2 (AWG 14)
Flexible
Wire end ferrule
with plastic sleeve
2.5 mm 2 (AWG 14)
Terminal data